@Amiwell79 - I reinstalled Tiny Aros B&P works, the problem lies in the systemstuff, I installed the drivers, tools and library from the archive which is on aros archives
You have to try with the reference ISO on Native PC, or VM, without copying TinyAROS, only so we can be sure that it works for you !
--- Italiano ---
Devi provare con la ISO di riferimento su PC Nativo, o VM, senza copiare TinyAROS, solo così possiamo essere certi che a te funziona !
@AMIGASYSTEM - Did you read deadwood's post ? Bars&Pipes cannot work properly on AROS (it only works on Hosted Linux).
It's the other way around. The problem I mentioned is immediatelly visible on hosted, but might not be visible on native. If I can get pass this problem on hosted, I can check if there are any other crashes further on.
3. Using MidiWatch to see output, started pipes and same illegal instruction
2. Not plugged midi in, started pipes, get output, complains no out or in, pipes starts, same illegal instruction
1. Plugged midi in, started pipes, get output, pipes starts, same illegal instruction
Edited by Jeff1138 on 29-04-2024 04:31, 6 months ago
Just seen the other instructions, here's some photos of the output (appears OK)
Try this:
-open a shell
-cd to the BarsnPipes directory
-start BarsnPipes with:
BarsnPipes debug
Normally any debug information is now printed.
In BarsnPipes, drag the icon from the Quantize tool into the pipeline and drop it there.
Double-click this icon in the pipeline. The window of the icon is opened.
Leave the window open and click in the track window (title becomes red).
Press the right AMIGA key and Q or select Quit in the menu.
Requester -> Save? -> Press No
If everything runs normally, a few debug messages will appear in the shell-window:
" ..."
"get entry for cowlist ..."
at the end:
Delete gui in RAM:
freelocalestrings
Done
Edited by Jeff1138 on 21-08-2024 13:34, 2 months ago
thanks to Mr. Franck Charlet we have usb midi support Alfred Faust many years ago wanted to bring Bars & Pipes but there was no usb midi drivers if there is a possibility to communicate any fixes and bugs of the program for those who know how to use it it would be great
Mr Faust may have made a mistake in the porting, let's hope for improvements in the next software versions Sorry for any inconvenience, we're doing our best Thanks to all the contributors to this project
Mr. Faust works bars&pipes without any problems so now I asked him what equipment he uses the problem could be the hardware at least the midi cable, stay tuned
Have you tried opening a shell where Pipes has been extracted and running BarsNPipes debug mode in it as per the first part of the instructions a few posts higher #51 and getting the output to see if it is the same?
is a few lines from the end of the output and according to Alfred should be OK
I suspect Alfred might be best to contact
You can view all discussion threads in this forum. You cannot start a new discussion thread in this forum. You cannot reply in this discussion thread. You cannot start on a poll in this forum. You cannot upload attachments in this forum. You can download attachments in this forum.